NQ3860A
is the second FAN based GFX cooler in our range, and
this is based on same design as the UFO CPU Coolers. The
small aluminium base is fittet with a 60mm crystal clear
fan and combined with a FAN speed control user can chose
between lownoise and high speed.
The cooler is to be installed on most midrange ATi and nVidia
based GFX cards with universal fittings. (Black bracket
on 2'nd picture)
Enclosed is 8 BGA memory heat sinks for free
installation on GFX card (some models need this).
The NQ-3860A is also included with 2 FAN control
systems. A stock cable system with either 5v or 12v for
FAN speed or FAN controller with variable voltage rating
from 5v to 12v. (both on 2'nd picture)
Important: All GFX with original cooler
mounted on memory modules need to be cleaned before
install of heat sinks. If this is not done correct, then
heat sinks will not stick to surface. Note: Heat performance is lower then cobber version.
Package: Retail blister
Specifications:
Use
with both ATi and nVidia based GFX
Fan: 60mm crystal clear
Noise Level: 12-17dB(A)
Heatsink Material: Aluminium
Total Weight: 190 g
Easy installation with instruction paper.
NQ 3860A fits
nVidia*
Geforce4 MX 420-460, Geforce4 Ti 4200-4800 series
GeforceFX 5200 - 5950Ultra series
Geforce 6600 - 6600GT series
Geforce 6800 - 6800Ultra series
Geforce 7800 - 7800GTX series
Geforce 7600 series
Geforce 7900 - 7900GTX series
Geforce 8400GS series
Geforce 8500GT series
Geforce 8600GT series
Geforce 8600GTS series
ATi*
ATi Radeon 9000 - 9800Pro series
ATi Radeon X300 - X850XT series
ATi Radeon X1800 series
ATi Radeon X1950 series
* Not all cards is supported due to low
hight on card. Messure from center of GPU/VPU to
PCI-Express connector. Must be more then half the distance
of the coolers dimensions.
